Ruger SR-762 Piston Rifle, Kimber Solo, Gunfight Tips, Slide Racking Gadget, P38
Sturm Ruger & Co. knew back in 2009 that they needed to be in the semi-auto rifle market with more than just the Mini-14. They wanted an AR-15-type rifle, but soon discovered that the"Mil-Spec" AR-15 left a lot to be desired. A standard AR sends its hot gases back to the bolt, pushing on the bolt carrier and opening it for the next shot. This makes for a very hot and very dirty bolt group after only a few rounds, and this can and does hurt both short and long term reliability. So while most of the market was busy copying the standard AR-15 design with their own branded product, Ruger decided to take the less beaten path, and create their own design. That design was the SR-556, in 5.56 NATO, or .223 Remington. Instead of just gas, the 556 employed a rod to move the bolt, this rod rode above the barrel, and was controlled by an adjustable gas block. The design is very similar to the rifle that used to be called "the right arm of the free world," the FN-FAL. This new Ruger rifle contained the gas/rod system of the FAL, yet had the weight advantage and ergonomics of the AR-15. Out of the gate the SR-556 was a hit for Ruger, and several variations of the SR556 are still extremely popular today.The only thing is, the FAL is a 7.62×51 (.308 Winchester), not a 5.56. So since the introduction of the SR-556 the market has been screaming for a SR-762. About two weeks ago Ruger finally introduced one into the market, based on the exact design of the SR-556. The MSRP of the SR-762 is a hefty $2195, but as an "all you'll ever need" rifle, we found it to be just that, and worthy of a lifetime purchase decision. ( Click Here to Read More )
Kimber Solo Carry Stainless – Pocket Carry Without Compromises
I first heard about the Kimber Solo from the new gun reports coming out of the 2011 SHOT show. At the time it was big news and I was really intrigued to hear that a major manufacturer, which I only knew from its reputation in building high grade .22 rifles in the 1990's and high end 1911-pattern pistols, was jumping into the increasingly crowded pocket pistol market. I was even more interested when I learned more about the Solo and discovered it was a single action striker-fired pistol with a good set of sights, ambidextrous manual safety and magazine release. As a fan of all pocket 9mm pistols, I made a mental note to watch my local shops and check one out as quickly as possible.Eventually, one of the largest Kimber dealers in our area received a Solo demonstration pistol. I had a chance to handle the pistol and really liked the way it felt in my hand. Constructed from stainless steel and aluminum, the all metal pistol had a good weight and balance even with an empty magazine. The build quality looked outstanding. What really sold me on the pistol was its size. As far as pocket 9mm pistols go, only a select few can ride comfortably in my front pocket for all day carry. Visually the Solo appeared to be just a shade smaller than my old-style bullnose Kahr PM9, and the weight felt about the same. For me, it would definitely work as a pocket pistol. (Click Here to Read More)
Defensive Handgun Training – What we're doing wrong?
There is no shortage of variations in the training methods and doctrines employed when it comes to the defensive handgun. Shooting schools are operated all across the country, police academies are in every state, and thousands military personnel are trained at various levels and locations. The only thing these different educational processes really have in common is that they place an emphasis on getting hits. Beyond that you will find differences, some subtle, some drastic. These differences apply to not just the doctrine that is taught but to the methods of instruction. The point of this article is not to offer one method or doctrine as the best, but to make you think about a few things that many defensive handgun instructional programs do the same. It seems to me that these programs make some mistakes. Here are some of what I consider the most common and egregious errors. ( Click Here to Read More )
Handi-Racker: Help Racking Semi-Auto Slides – Guest ‘Tuber Justin Opinion
Ladies, have you ever been advised to "just use a revolver" because you have trouble racking the slide on a semi-automatic handgun? Men, ever feel frustrated that you can't grip the slide as firmly as you once did? Ladies in particular have often been advised away from the semi-auto handgun because they have trouble gripping and racking the slide. But before you men snicker too much – I personally know some gentlemen that have lost hand strength in their golden years and have difficulty with semi-autos. Many men also lose grip strength due to illness or injury. I know young athletic men that have experienced an injury that temporarily leaves them unable to rack a semi-auto. Luckily for us all, there is a pretty slick little product available that addresses this problem for everyone – the Handi-Racker. ( Click Here to Read More )
The Walther P 38, a Very Important War Dog
The Walther P 38, caliber 9mm, was one of the most important handguns of World War II and became among the most influential pistols of the twentieth century. It earned a reputation for accuracy superior to most service pistols, and the P 38's takedown lever made field maintenance and cleaning simple compared to any other service pistol. The 9mm cartridge does not have the smash of our own .45 ACP cartridge, but the 9mm shoots flat over a distance and penetrates web gear in a superior fashion. The P 38 is reliable, a great shooter and a good recreational handgun. The postwar P 38 and the slightly modified P 1 use an aluminum frame. These handguns are well made with good material, lighter than the steel frame P 38, and reliable. Parts from the original generally interchange with the P 1. ( Click Here to Read More )
GunsAmerica
Where America Buys and Sells Guns.
http://www.gunsamerica.com